Badger Meter is offered by RADWARD LTD for years at reasonable prices and delivery time to United Kingdom . Check our web page for products from the brand Badger Meter regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout United Kingdom .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Badger Meter control valve
Process Control Valve
Process control valve Type: RC200 Nominal size: 1/4 " Material Valve housing: stainless steel SS316 Material valve bonnet: stainless steel SS316 Connections: 1/4 "NPT Trim / Material: size "G" Kv - value: 0.17 Characteristic: linear Spindle seal: Chevron rings, PTFE / PFA Drive: includes spring Fluid temperature to 200 ° C Pressure: PN 320 Mounting position: any More pressure ratings, materials and Temperature classes available on request
(Type: 250BR - 1,25" bronze tee type meter.)
M2000 DN 40 dairy fitting Material and technical data: Measuring tube: Stainless steel 1.4571 Liner: PTFE Housing: stainless steel 1.4301 Protection class: IP 67 Connection: screw connection DIN 11851 / stainless steel 1.4571 (Dairy) Electrodes: Hasteloy C Min conductivity. 5 S / cm (20 S / cm demi. Water) Measuring range: 0.03 to 12 m / s Accuracy: ± 0,2% of reading ± 1 mm / s Nominal pressure: 16 bar Overall length: 225 mm Run transmitter: M2000 Mounting: built Housing: cast aluminum painted in IP 67 Display: LCD, 4 lines / 20 digits, backlit Outputs: Analog output 0/4 - 20 mA : Scalable pulse max. 10 kHz : Min / Max + Status + direction indicator Configuration: 3 buttons Interfaces: RS 232, Modbus RTU Leerrohrdet. : On off Supply: 85 - 265 VAC
WATER FLOW
Magnetic-inductive flowmeter
MID M 1000 with flange DN 50 ST 37 Hard rubber Hastelloy C 230VAC Magnetic-inductive flowmeters Type "Magneto Flow M1000 AM". Transducer: Type II Process connection: flange EN 1092-1 / St. 37 DN / PN: 50/16 * Measuring range: 3.6 to 1200 l / min Installation length: 225 mm Lining: hard rubber Max. Temp. 80 ° C Electrodes: Measurement and idle electrodes Elec Material: Hastelloy C Housing: St. 37 painted gray Transmitters: Type M1000 AM Assembly: Assembled version Software language: English / German * Units: Metric Current output: 0 / 4-20 mA * Endwertskala: standard (2.5 m / s) Pulse output: 24 V DC active / passive * Pulse rate: 1 PPL LCD display: 4 lines Read flow: 8 digits (unidirectional / bidirectional) 2 totalizers: 14 digits Protection: IP 67 Power supply: 92 to 275 VAC Min.Leitfähigkeit: 5 microS / cm Accuracy: +/- 0.3% of the measured value
ELECTRODES, WITH METER MOUNTED PRIMO AMPLIFIER, 316 SS GROUNDING RINGS
SN: 0506-067 0-75 meters for DN 50 Electromagnetic Flowmeter 3 x (2 x 0.25 mm²) + Ground of 160 Ω / km
MID M 1000 flange ISO DN 100 PN 16 Hard rubber Hastelloy C 230VAC
MID M 1000 with ISO flange DN 150 Hard rubber Hastelloy C 230VAC
Body: Bronze Measuring chamber: Vectra O-rings: Viton Measuring range: 18 - 265 l / min Accuracy: + / - 1.5% of the value p-max: 16 bar t-max: 120 ° C Connection: R 1 1/4 "male Length: 273 mm Mounting position: horizontal, vertical Pulse Output: Transistor NPN open Scale Factor: 0.00001 to 0.9999 Supply: 12-24 VDC
for petrol, oil, digital and electronic counters, rotary platforms ½, flow. 0-28 I / min
Product preset Max 120°F/50°C Min 20°F/-5°C 868 mhz
Einbauzähler mit Impulsgeber für Schmieröl
ELECTROMAGNETIC FLOW METER
Magnetic flowmeter with transmitter M1500 for full pipes.
Type II DN 100 / PN 16 with amplifier M1500 for full pipes
(P/N 9005257) M1500 (24 VDC)
Magnetic flowmeter Magneto Flow Type II DN 32 / PN 16 with transmitter for M2000 full pipes.
schetchik jidkosti
MN SERİES,70-733 LPM 1200 KPA 3”/80MM BSP
BADGER METER RCDL DISC METERS POSITIVE DISPLACEMENT – NUTATING DISC
