logo

Sale of Erichsen products in United Kingdom

Erichsen is offered by Impexron GMBH for years at reasonable prices and delivery time to United Kingdom. Check our web page for products from the brand Erichsen regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout United Kingdom .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

Brand products Erichsen

MODELL 312 Bestellnummer: 0002.01.31

KONISCHER DORNBIEGEPRUFER

0002.01.31 Model 312

Conical Mandrel Bending Tester, EN, ISO, ASTM

0004.01.31

Sheet Metal Testing Machine, Model 100 with manual operation, maximum drawing force 30 kN and compliance with the standard adjustable constant blank holding pressure max. 10 kN, with Tiefungsanzeige by counting with 0.1 mm Reading accuracy as well as a Test Tool No. 27 after EN ISO 20482, for testing the deep drawability of sheet metal and bands from 0.1 to 1.5 mm thick (² at approximately 400 N / mm strength) in widths of 13-90 mm, by means of the Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE. Weight: approximately 36 kg net Dimensions: approx 340 x 350 x 450 mm (L x W x H)

0004.01.31 MODEL 100

Sheet Metal Testing Machine

0009.01.31

(Dry film thickness meter Rossmann 233 ISO, ASTM, BS, FTMS "REFERENCE CLASS" Measuring range: 0 - .mu.m 1000)

0019.01.31

[multi cutting device 295 / I with 6 blades and cutting distance 1 mm for cross-cut tests in accordance with EN ISO, ISO, VDA and EN, incl Motion, Polyamide bristle brush and plastic case]

0019.01.31 (MEHRSCHNEIDENGERÄT 295/I)

(Having 6 blades, cutting distance for 1 mm Cross Hatch tests in accordance with EN ISO, ISO, VDA, EN, incl. magnifying glass Nylon bristle brush and plastic case)

0019.014.31

Cutting device 295 / XIV, hard-coated probe mounted in adapter block with holder, for cuts on curved Surfaces, incl. Flexible ruler and Plastic case, with no type M

0019.02.31 (MEHRSCHNEIDENGERÄT 295/II)

(Having 6 blades, cutting distance of 2 mm cross hatch tests in accordance with EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass, polyamide bristle brush and plastic case)

0019.02.31 Multi Cutter 295 / II

(with 6 blades, cutting distance 2 mm for cross-cut tests according to EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass Nylon bristle brush and plastic case)

0019.07.31 (MEHRSCHNEIDENGERÄT 295/VII)

(Having 6 blades, cutting distance of 3 mm grid cut checks to EN ISO, ISO, JIS and VDA, incl. magnifying glass Nylon bristle brush and plastic case)

0049.17.33

Probe cards PK used to determine the opacity of pigmented Paints of all kinds: Type 22/4 - Spread size: 500 cm ²

0058.01.31 model 263

Indentation hardness tester according to Buchholz DIN 53153 "REFERENCE CLASS" incl. special measuring microscope with lighting

0062.02.31

Dipping flow cup 321 with nozzle diameter 4 mm

0062.04.31

Dip Flow Cup (Orifice dia. 8 mm), Model 321

0069.01.33 (150 MM BREIT, 10 µM)

(Single spirals to the model 358)

0071.03.31

Wet Film Thickness Gauge 234 R / III DIN, ISO, ASTM, BS, NF "REFERENCE CLASS"

0071.03.31 Wet Film Thickness Gauge Model 234 R/III

DIN, ISO, ASTM, BS, NF "REFERENCE CLASS" Measuring range: Scale division: 0-125 µm; 5 µm

0094.01.31

Ritzstift nach van Laar 426

0098.01.31

(Coating thickness gauge Paint Inspection Gauge P.I.G.455 compl. with normal cutting no. 6 for thicknesses to 200 microns and in marker Lederetui)

0100.01.31

Sikkens scratching tool 463

0165.04.31

Diving flow cup in accordance with nozzle diameter 6 mm

0169.01.31 MODEL 433

Wet Film Thickness Gauge

Contact us for request