Siemens (Landis Gyr) is offered by RADWARD LTD for years at reasonable prices and delivery time to United Kingdom . Check our web page for products from the brand Siemens (Landis Gyr) regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout United Kingdom .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Silicon photocell flame sensor RAR9 for LAL .., .. LAE1, LOK16 ... and ... LAE10 for monitoring yellow burning oil flames, sensor tube length: max. 73mm, line length: max.100m, Protection: IP20 (IP40 with AGG09), dimensions: ca.130x22 (L x D in mm)
(Actuator for gas and air valves without AGA56 ... with single-wire potentiometer 135 ohm / 90 ° Rotation: reversible Rotary u. Holding torque 15 Nm Drive shaft: No. 3, 9 mm quadr, zweisietig.. Drive shaft: interchangeable Duration (at 50Hz): 45s / 90 °, 65s / 130 ° Setting angle: up to 160 ° Limit: 2 Auxiliary contacts: 2 Voltage: AC24 V-15% / + 10% Frequency: 50 ... 60 Hz + -6% Power consumption: 20 VA Protection: IP54 Temperature range: -20 ... + 60 ° C Humidity: <95% RH Cable entry: 4 x Pg13,5 threaded 2 x Pg13,5 Unthreaded Dimensions: 180 x 132 x 133 (L x W x H in mm) Weight: 3,50kg Country of origin: Germany / Stat. W-No .: 84169000 AL: N ECCN: EAR99)
UV flame detector QRA53.E27 for LGK 16 ... / ... LGI16 for monitoring gas flames, yellow or blue burning oil flames and for ZündfuknenkontrolleFühlerrohrlänge: 125 mmEmpfindlichkeit: normalNetzspanung: AC 220V ... 240VTemperaturbereich: -20 .. + 60 CFeuchte: <95% rFSchutzart: IP65Maße: ca. 227 x 72 x 75 (L x B x H in mm) weight: 0.84 kg
Siemens (Landis & Gyr) QRA 10 C UV-Flammenfühler, Normalausführung
Siemens flame detector QRA 50 M LFE 50, exposing the front, 50-60 Hz
UV cell for QRA 2/10
UV-detector
240 V, 50/60 Hz, the two-way valve servomotor
for SAX ..on gas valves VG ../ VL Dimensions: 80x80x85 approximately (L x W x H in mm) Weight: 0.32 kg Country of origin: Germany / Stat. W.-Nr.:84169000 AL: N ECCN: N
Clammy base AGM 14.1 for LFL ... (for 6xM16x1,5) mass approx 103x103x25 (LxWxH in mm) Weight approx. 0.16 kg
UV replacement cell for QRA2, QRA2.9, QRA10 ...
UV replacement cell
photocell
Adapter frame for the exchange of RWF31 / 32 ... For use of the RWF55.50A9 in the cabinet - size: ca. 138 x 61 x 20 (L x B x H in mm) Weight about 0.03 kg
Uufbau adapter for mounting RWF40 ... on 35mm DIN rail for use on Montageplatte- Dimensions: approx 192 x 61 x 90 Weight: 0.34 kg ca-
UV replacement cell
