Rössel-Messtechnik

Sale of Rössel-Messtechnik products in United Kingdom

Rössel-Messtechnik is offered by RADWARD LTD for years at reasonable prices and delivery time to United Kingdom . Check our web page for products from the brand Rössel-Messtechnik regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout United Kingdom .

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

Brand products Rössel-Messtechnik

10000 PN40/DN25

(Flange fitting RM-type C14J-120/220 B1, B 1.4571-3.1 Connection head: Form BKD-RPH, IP 65 screw A2 Cable gland: M20 x 1.5, blue Neck / Shroud: mm ø14x2,5, W.-Nr.1.4571-3.1 B Extension Length: 120 mm Flange: Form B1, PN40 / DN25 : Mat 1.4571-3.1 B Installation length: 220 mm Rejuvenation: 40 mm ø 9x1 mm Inspection certificate: EN 10204 - 3.1 B)

10000 PN40/DN40

(Protective tube with flange B1 RM-type 21.3 / 15.8 / 8.5, 115/500, 1.4876 - 3.1 B Connection, head end: M24x1,5 Shroud: 21.3 x 2.8 mm Ø W. no. 1.4876-3.1 B (Incoloy 800) Flange: Form B1, PN40 / DN40, EN 1092-1 W. no. 1.4571-3.1 B Rejuvenation: 50 mm x 3.7 mm ø15,8 W. no. 1.4959-3.1B (Incoloy 800 HT) Overall length: 636 mm Neck tube length: 115 mm from Allen Installation length: 500 mm Accessories: ring and seal Inspection Certificate: EN 10204 - 3.1 B)

2-1506-00068-11

Insulated resistance thermometer 2 x Pt100 / 0 RM-type B-15x2 / 6-365 / 35-400-1.4571 Measuring tip Ø6x35mm lg. 1.4571 m. Schutzro.verschweißt Connecting head: B-M24x1,5 / M20x1,5 Shroud: Ø 15 x 2 mm W. - 1.4571. Coat - measuring insert: WMM 5.0 / 6,0-2Pt-B-435 Coat - Material: Stainless steel W. - No. 1.4541. Coat - Ø: 5.0 mm : Measuring tip 50 mm reinforced : To Ø mm 6,0, W - 1.4571. Measuring insert: 435 mm Measuring resistance: 2 x FS Nominal length: 400 mm Special I: thermowell Ø15x2 is mm with the : Coat - Feeler : welded Special II: measuring insert is NOT interchangeable Special III: free probe tip Ø6,0 x 35 mm long W. - 1.4571. Limiting error MW: DIN EN 60751 class B. Drawing - No: 2-1506-00011.

2-2200-00043-11

Insulated thermal wire 1 x NiCr-Ni (type K) RM-type TT-465-2K-0,22l-IEC, cl. 1

2-4005-00228-11

(Mantel-NiCr-Ni, RM-Type: AL-RT-KB-3,0-6000-10, Kl.1, RT 4.5, copper braid: TG-412-2KX-0.25L, length: 10 m, casing material: Inconel 600, sheath diameter: 3.0 mm, length: 6000 mm, limit deviation: DIN IEC 584 Kl.1, feature: Anschweißplättchen, dim 4,5x6x18, bend protection, drawing no.:. 2-4005 -00,009)

2-4115-00019-11

Thermocouples

2-9901-00005-11

Certificate Acc. EN 10204 - 3.1

6-0521-00018

(Screw-Widerstandsth. 2 x Pt100 / 0 RM-type B8J-0/100, R1 / 2 ", 1.4571, connecting head: Form B, die-cast aluminum CABLE GLAND. : Plastic, gray (IP68) Liner: 8x1 mm  : Mat 1.4571 stud: G1 / 2 "W-1.4571 Measuring Insert: WMR 810-2Pt-B-140 Installation length: 100 mm Limiting error DIN EN 60751 class B. Operating temperature: -50 to + 400 ° C Special> ME non-replaceable)

ALSTE-KB-1,0-600-3-A

Insulated thermocouple 1 x NiCr-Ni (type K) RM type ALSTE KB 1,0-600-3, Kl.1, TT-465-IEC              TS KM (HT) green with QM-3,2-HT

TT-465-2K-0,22L-IEC

Insulated thermal wire 1 x NiCr-Ni (type K)

RM-Type B-15x2-1400-1.4571

Immersion-Mineral-Insulated-Resistance-Thermometer

2-7220-00001-11

Adjustable flange

2-1506-00119-11

Immersion-Mineral-Insulated-Resistance-Thermometer

TMM-NB-6,0-650

Measuring insert thermocouple NiCrSil-NiSil

B-15x2/6-365/35-400-1.4571

Mantel-Widerstandsthermometer

WT-1PT-B-6X0

Exhaust Temp RTD

S/N 501918

Immersion jacket resistance thermometer

Contact us for request