| BRAND | Demag |
| Product | DC-Pro 10-1000 1/1 H10 V6/1.5 380-415/50 |
| Description | DC chain puller |
| Internal code | IMP4885076 |
| Technical specification | The Demag DC-Pro chain hoist meets all requirements for a quality Demag product and sets Standards in the industry standard for hoists. It is a highly flexible chain hoist that is within can be installed and put into operation in a very short time. The DC-Pro is characterized by high ease of use, high productivity, optimal use of room height and maximum reliability and both the economic and safety-related requirements of a modern hoist equitable. The following equipment is included in the standard package: - Contactor control with 24V control voltage (with internal tri-state signal transmission) - An operating limit switch for the highest and lowest hook position, to safely switch off the chain hoist into the end positions - An operating hours meter that can be read from the outside - Two standard lift speeds as main and fine stroke - The speed-monitored brake and clutch principle ensures a high level of safety and a long time lifetime - Transmission is maintenance-free for up to 10 years, brake and clutch up to 5 years - For service purposes, the operating parameters can be displayed via a visual display or wirelessly via the built-in infrared diagnostic interface can be read out of the chain control - All electrical connections of the chain hoist are pluggable - A central service room that provides quick and direct access to all important plug connections and allows easy chain lubrication - Quick and easy chain drive replacement without dismantling the motor or transmission parts supply network Line voltage 400 V Line frequency 50 Hz Network type three-phase three-phase Technical data chain hoist Load capacity 1000 kg FEM/ISO group 2m+/M5+ (20% more than 2m/M5) Hakenweg 10 m Control cable length 3.9 - 6.8 m Weight approx. 57 kg (net total) Constraint 1/1 Lifting speed approx. 6/1.5 m/min Control voltage 24V AC Hoist voltage 380-415 V/ 50 Hz ZNK 100 A 8/2 lift motor Duty time 40/20% Rated power 1.09/0.27 kW Protection class IP 55 Insulation class F Ambient temperature -20°C to +45°C C-size 505 mm Surface protection and coloring Lifting gear RAL 5009 azure blue High-quality powder coating of the aluminum components of the chain hoist ensures very good corrosion protection. Kettenspeicher Standard chain storage designed for 10 m hook travel control unit Control line with control switch Control switch: DSC Control line: height-adjustable standard control line 3.9 - 6.8 m Other selected options: documentation EU documents in accordance with the Machinery Directive |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Demag - DC-Pro 10-1000 1/1 H10 V6/1.5 380-415/50 DC chain puller number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in United Kingdom Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Gerät FGB-2, EMV
device
resistor
DC Motor
PENDULUM DRIVE
Brake control GS 1 AC
ENGINE BLOCK diode,TYPE: ZBA132C4B140 SERIAL NO: 74756362 SPARE PARTS DES engine belonging to LANS
Guide roller set EKDR
(Angle grinder,6 bar)
angle grinder
(DS-energy-saving motor IE3, power / kW: 75, Voltage / V: D 415 network operation, Frequency / Hz: 50 rpm / 1 / min: 1482 Type / IM: B3, protection / IP: IP55, therm class.: 155 (F) Umgeb.-temp ° C. 50, thermal protection: NO, the shaft end A side: 65 x 140 mm Terminal box position: Top, Other: anti-condensation heater, Light storage, fixed bearing N-end, stainless steel screws Special winding, vibration severity grade A, half key Color System: moderate, color: RAL 7031 blue-gray, film thickness: 70 .mu.m)
No friends ENCODER
MOTOR 37KW 1470T / MN 380V 70,5 A HZIP55
CRANE MOTOR
terminal box set
Spring ring
Cone rotor brake motor
Konuslaufer Bremsmotor
Konuslaefer Bremsmotor